PowerMadd – 850 Motorsports

STAR LED LIGHT KIT

Jerry Jones — Thu, 05 Sep 2019 23:01:38 +0000

The newest accessory for the Star line of handguards – the LED Light Kits increase your visibility and improves your peripheral lighting
Simply snap out your vent covers and snap in the LED light kit
They can be wired directly to your battery by using the included 12 volt waterproof switch or they can be tapped into any other 12 volt power source
These bright LED lights (200 lumens each) provide additional visibility and safety – allowing you to see more and be seen easier
The LED lights offer improved visibility while only consuming 4 watts each
These are a great addition to any ATV, motorcycle or snowmobile
Requires: Sentinel Handguards and mount kit; sold separately
Kit includes: (2) COB LED light, (2) vent covers, a 48″ switch wire, an electronic control wire, a 12v waterproof switch, (2) 12v ring terminals, (2) 3M T-Taps, (2) .25″ male spade terminal, (4) self tapping screws, (4) flat washers and (6) zip ties

The post STAR LED LIGHT KIT appeared first on 850 Motorsports.

POWERMADD SENTINEL LED LIGHT KIT -VENT COVER

Jerry Jones — Thu, 05 Sep 2019 22:51:44 +0000

The newest accessory for the Sentinel line of handguards – the LED Light Kits increase your visibility and improves your peripheral lighting
Simply snap out your vent covers and snap in the LED light kit
They can be wired directly to your battery by using the included 12 volt waterproof switch or they can be tapped into any other 12 volt power source
These bright LED lights (200 lumens each) provide additional visibility and safety – allowing you to see more and be seen easier
The LED lights offer improved visibility while only consuming 4 watts each
These are a great addition to any ATV, motorcycle or snowmobile
Requires: Sentinel Handguards and mount kit; sold separately
Kit includes: (2) COB LED light, (2) vent covers, a 48″ switch wire, an electronic control wire, a 12v waterproof switch, (2) 12v ring terminals, (2) 3M T-Taps, (2) .25″ male spade terminal, (4) self tapping screws, (4) flat washers and (6) zip ties

The post POWERMADD SENTINEL LED LIGHT KIT -VENT COVER appeared first on 850 Motorsports.

POWERMADD SENTINEL HANDGUARDS

Jerry Jones — Thu, 05 Sep 2019 22:45:45 +0000

PowerMadd is excited to introduce our latest handguard offering! The Sentinel Handguard is designed to be the most stylish, durable and funtional handguard to date. A bit larger than our Star Series handguard, the Sentinel offers you more protection with an updated look and great accessories.

The mounting brackets are 6061 aluminum, while the guard itself is made of two different types of plastic—a stiff two piece spine for durability, and a softer colored body for flexibility.

The post POWERMADD SENTINEL HANDGUARDS appeared first on 850 Motorsports.

POWERMADD SENTINEL HANDGUARDS ATV/MX MOUNT KIT

Jerry Jones — Thu, 05 Sep 2019 22:22:19 +0000

PowerMadd?s ATV/MX mount kit comes with two aluminum brackets which can be positioned to mount over the top or underneath the levers

To mount the guards you will need to find ½? of space on the bar as close to the handgrip as possible

You may need to move your levers, throttle blocks, etc. in order to make room for the mounting bracket

Includes (2) aluminum brackets; (2) steel straps; (2) M6 x 75mm hex head bolts; (2) M6 x 25mm hex head bolts; (2) M6 lock nuts; (2) M5 x 10mm button head screws; (4) large spacers; (2) flat washers and (4) small spacers

Requires 3mm hex wrench and a 10mm wrench

Note: This mount kit will not work on 2007 and up Yamaha Grizzly

NOTE: For 2007 and newer Yamaha Grizzly use the Tri-Mount PM#34269 due to the lack of available space on the bar by the grips.

The post POWERMADD SENTINEL HANDGUARDS ATV/MX MOUNT KIT appeared first on 850 Motorsports.

HANDGUARD TRI-MOUNT ATV/SNOWMOBILE

Jerry Jones — Thu, 05 Sep 2019 22:17:14 +0000

PowerMadd’s Tri-mount is designed to mount to the upward sweep section of your handle bars
Includes (2) rod mounts; (2) handlebar mounts; (2) duckbill spacers; (6) 10mm nut; (2) 6mm lock nuts; (2) 6mm bolts and (4) washers
Includes (2) M6 x 70mm bolts and (4) 13mm spacers
Requires a 4mm hex wrench, a 10mm wrench and a 17mm wrench

The all new Tri-Mount Kit offers another area to mount the handguards-just below the bend on the rise of the bars. This is an ideal choice when space is limited near the controls, especially on utility qauds and some snowmoblies. East to mount because there is no need to move controls to make space. Note: Work only on 7/8″ bars.

The post HANDGUARD TRI-MOUNT ATV/SNOWMOBILE appeared first on 850 Motorsports.

HANDGUARD MOUNT ATV/DIRT BIKE/MOTORCYCLE MOUNT

Jerry Jones — Thu, 05 Sep 2019 21:15:22 +0000

Universal ATV, Dirt Bike, Motorcycle mount for PowerMadd Star Handguard System.
Sold per pair.

The post HANDGUARD MOUNT ATV/DIRT BIKE/MOTORCYCLE MOUNT appeared first on 850 Motorsports.

PowerMadd STAR HANDGUARD

Jerry Jones — Thu, 05 Sep 2019 21:05:07 +0000

The strongest protection you can buy. The Star Series Handguard is designed to take a beating. The most versatile handguard on the market. Universal fit for ATVs, motorcycles and snowmobiles. The Star Series is made from two different types of plastic – a stiff spine for protection and a softer colored body for style. The vent cover snaps out for summer riding or to snap in the optional Extensions for added wind and mud protection.

PowerMadd Star Handguard System
Get the ultimate in hand protection for your ATV, motorcycle, PWC, and snowmobile
Remove the vent covers for better airflow, while still blocking branches and debris
Handguards with standard removable air deflector
Sold as a pair
Mount sold separately
https://850motorsports.com/product/handguard-mount-atv-dirt-bike-motorcycle-mount/

The post PowerMadd STAR HANDGUARD appeared first on 850 Motorsports.