SSV Works the market leader in off-road audio systems and accessories, is proud to announce the launch of the new Polaris RZR kick panel pods for model years 2014 and up, including the new Turbo S. Literally install this pod in minutes!

Utilizing new and superior technologies, including 3D modeling, SSV Works have fully optimized the space around the pod, allowing it to fit perfectly every time. The UV stable and all-weather durable kick panel pods ensure that you never have to worry about the environment you ride in.

The SSV Works RZ4-F65 is optimized for sound quality, is weather-proof and resistant to extreme environmental conditions, and designed for quick and seamless integration using factory mounting locations.

The kit includes:
• Plug and play connectivity with optional wiring harness
• Weather-proof molded grommet and integrated speaker terminals
• Stainless steel hardware

The RZ4-F65 have the option to be unloaded so that you can incorporate your own 6.5-inch speakers for a custom install, or available pre-loaded with SSV Works Powersports speakers or Kicker speakers.

Speakers:
SSV Works Powersports speakers: (RZ4-F65A) Get louder, cleaner sound even in the dirt and mud. Engineered specifically for Powersports, the new WP-A6 WeatherProof speaker brings audiophile grade components to the outdoors. The 25mm Ti- tweeter creates crisp brilliant highs engineered to be heard outdoors, even in a helmet…over the motor…haulin’ down the trails. The grille mounted tweeter allows for peak cone travel creating maximum output while providing a low profile with optimal weatherproofing.
Marine speakers are great for boats; however boat speakers don’t get as wet, dirty or muddy as you do in a Side X Side. WP-A6 speakers feature an EPDM duo lock gasket surrounding the speaker to keep the water out and the sound pressure in. EPDM conforms to the surface and seals tight no matter where you ride, in direct UV, extreme heat, or in freezing temps. Reliability meets control with the Santoprene surround; a 30% lighter thermoplastic elastomer surrounding the polypropylene cone for exceptional volume and clarity in the harshest conditions.
The SSV Works WP-A6 speaker features a unique positive lock connector to prevent speaker wire detachment inside the enclosure. No matter how hard you drive, your speakers will keep on rockin’ with 4ohms and 60w RMS/120w peak power.
*Multiple Patents Pending*

Kicker KM Marine Speakers: (RZ4-F65K) Spectacular highs and midrange sounds provide full-range audio specifically for a marine environment – 6.5″ 195 watt (65w RMS) 2-way coaxial speakers.

Without speakers: (RZ4-F65U) order em empty. Already have speakers? This is for you.

SSV Works Chroma Grille Upgrades:
SSV Works WP-A6 speakers add acoustically transparent mesh grilles with interchangeable color inserts to add the ultimate in customization to your Side X Side. The inserts are easily swappable allowing you to custom-match the speakers to the rest of your ride, favorite team or paint scheme. Choose from Red, White, Blue or Orange. Sold in pairs. (not compatible with Kicker speakers)

Plug-&-Play Extension Harness:
Spend less time installing by using our Plug-&-Play Extension Harness with this speaker pod set. Simply plug one end into the speaker, and the other end into our MRB3 controller. Thats it!
Not using our MRB3? No problem! Simply cut that end of the connector off and install it like any normal speaker wire.

*Note: Additional parts are required if using Polaris Ride Command with this product. Please contact us at 818-991-1778 x1 for more details.*

Features:

• The 25mm Ti- tweeter creates crisp brilliant highs engineered to be heard outdoors, even in a helmet…over the motor…haulin’ down the trails. The grille mounted tweeter allows for peak cone clearance and maximum output while providing a low profile with optimal weatherproofing.
• SSV Works speakers feature a unique positive lock connector to prevent speaker wire detachment inside the enclosure. No matter how hard you drive, your speakers will keep on rockin’.
• Marine speakers are great for boats; however boat speakers don’t get as wet, dirty or muddy as you do in a Side X Side. WP-A6 speakers feature an EPDM duo lock gasket surrounding the speaker to keep the water out and the sound pressure in. EPDM conforms to the surface and seals tight no matter where you ride, in direct UV, extreme heat, or in freezing temps.
• Specs: 6.75” Powersports marine speaker with 25mm Titanium hard dome tweeter, Santoprene surround, UV Stable ASA plastic grille with optional Chroma grille color inserts, 2-pin posi-lock connectors, 4ohm, 60w RMS/120w peak power, just 2-3/16” (5.5 cm)

The post POLARIS RZR 2014 AND UP FRONT SPEAKER PODS WITH 120 WATT 6 1/2 SPEAKER appeared first on 850 Motorsports.

SSV Works custom molded sub enclosure is designed for a 10″ subwoofer and easily installs and replaces glovebox. Just simply use the factory glove box door! NO CUTTING REQUIRED, the box simply bolts in and provides the proper airspace required for a 10″ woofer. Includes a pre-installed pass through subwoofer wire.
They are 100% fiberglass for the best sound quality and bass response. They are finished in a black texture coat to match Polaris textures and can be custom painted to match your color scheme. – Includes stainless mounting hardware and step-by-step installation instructions. NOTE: requires external amplifier. Not directly compatible with WP overhead systems..

SSV Works Premium Marine Sub:(RZ4-GB10A) Our premium Marine subwoofer started the revolution. They produce great volume and clarity for the price and are very reliable. – 10″ 600 watt (300w RMS) woofer

Kicker Powersport Subwoofer:(RZ4-GB10K) This weatherproof sub is at home on the trail, in the sand and on the road. – 10″ 800 watt (400w RMS) woofer

Without speakers:(RZ4-GB10U) order em empty. Already have speakers? This is for you.

The post RZ4-GB10 – POLARIS RZR TURBO S AND XP1000 2019+GLOVE BOX SUB BOX WITH 600 WATT 10 appeared first on 850 Motorsports.

(fits RZR Turbo S and 2019 RZR XP models)

The post POLARIS RZR TURBO S VELOCITY AND XP1000 2019+ POWERERD GLOVE BOX SUB BOX WITH 10IN SUB appeared first on 850 Motorsports.

Plug-&-Play Extension Harness:
Spend less time installing by using our Plug-&-Play Extension Harness with this speaker pod set. Simply plug one end into the speaker, and the other end into our MRB3 controller. Thats it!
Not using our MRB3? No problem! Simply cut that end of the connector off and install it like any normal speaker wire.

The post CAN-AM MAVERICK X3 AND X3 MAX 4IN DASH SPEAKER POD appeared first on 850 Motorsports.

Specs:
– Bluetooth, Aux-in, FM & AM sources
– Compact control with hide-away unit for easy mounting
– Weather-proof durability
– 2Ω stable 200W max power
– Control volume, track, play/pause
– 6 preset EQ options
– 3.5mm AUX-in & USB charging
– Plug & play installation
– 4v RCA low-level preout
– Hyper-white LED back lighting
– 5′ cable between controller and hide-away unit

For custom applications, upgrade to the Extension Cable to give the controller 6′ further distance from the brain for even more mounting options.

The post PANEL MOUNT BLUETOOTH MEDIA CONTROLLER WITH LCD DISPLAY appeared first on 850 Motorsports.

Add a SSV Works MRB3 Bluetooth Media Controller to your Polaris RZR XP 1000 without any cutting required! The RZ3-DM3 Dash Kit has been designed and engineered specifically to fit the SSV Works MRB3 unit. The kit seamlessly mounts in the space where the pocket of the dash is located and has 4 spaces for switches. Includes 4 blank switch plates.

*MRB3 not included*

• No cutting required
• Fits the SSV Works MRB3 unit
• Includes 4 blank switch plates

The post POLARIS RZR XP 1000 DASH MOUNTING KIT FOR MRB3 BLUETOOTH MEDIA CONTROLLER appeared first on 850 Motorsports.