MudGuards – 850 Motorsports

FENDER EXTENSIONS FOR BRP CAN-AM MAVERICK FENDERS (MAX COVERAGE)

Jerry Jones — Sun, 07 Feb 2021 02:33:57 +0000

MudBusters MAX COVERAGE front fenders are now available for your X3 “Super Extended Fender Flares”!

BRP’s Super Extended fenders don’t provide enough coverage, so we fixed that problem with this kit. Our new front fenders offer over 3″ of coverage in some areas and are available in 3 sizes (standard, large, & MAX coverage). The rear fenders cover ALL of the rear tires and are adjustable to fit your needs!

Adding our fender extensions to your BRP fenders WILL increase your fender coverage to keep you clean and make clean-up less time-consuming.

-Formed to fit (not flat)

-Hardware & Instructions included

-Easy installation (Installs in 1 hour or less)

-Discounted single replacement fenders are available for existing customers

*IMPORTANT: This kit does not include the BRP Super Extended Fenders Part#715002973. You must have the BRP fenders in order for our product to fit your vehicle.

The post FENDER EXTENSIONS FOR BRP CAN-AM MAVERICK FENDERS (MAX COVERAGE) appeared first on 850 Motorsports.

HONDA TALON REAR MUD GUARDS

Jerry Jones — Sun, 07 Feb 2021 02:04:14 +0000

MudBuster’s Honda Talon rear mud guards were designed to fill the gaps located in front of the rear wheels. This area is susceptible to getting filled with debris from the rear tires. Dust also enters the cab through this exposed section as well. Our mud guards protect this area and make clean-up a lot easier! Fits 2 and 4 seater models

Note: modification to this product will be necessary if you have Honda Nerf bars or a similar product with the same mounting points.

Each set consists of (2) mud guards, hardware, and instructions. Installation should only take 10 minutes with the proper tools outlined in the instructions.

The post HONDA TALON REAR MUD GUARDS appeared first on 850 Motorsports.

HONDA TALON 1000 R FENDER EXTENSIONS

Jerry Jones — Sun, 07 Feb 2021 01:57:27 +0000

The new Honda Talon is finally here and we have side-by-side fenders to help keep you clean! We have several options to choose from below. Please keep in mind, the Talon 1000-R models are 68.5″ wide versus 64″ wide for the 1000-X models.

These flares can fit 2 and 4 seat Honda Talon R models!

*note modification to this product will be necessary if you have Honda Nerf bars or a similar product with the same mounting points.

Honda Talon 1000-R Fenders (also fits 1000X models with wheel spacers and/or aftermarket offset wheels)

1000 R Large Front Fenders: Ideal for 68.5″ wide Talons. This kit provides maximum protection from dirt, water, sand, cactus, gravel, and mud.

1000 R Standard Front Fenders: Ideal for 68.5″+ wide Talons. This kit offers a lower profile look with great coverage to keep debris out of your cab. This design covers 70% of the front wheel wells.

1000 R Rear Fenders: Ideal for 68.5″+ wide Talons. This kit offers maximum protection from dirt, water, sand, cactus, gravel, and mud. Our rear fenders provide excellent coverage and they give block debris in the fender well.

*Note: We recommend our “R” model fenders for maximum coverage for your 1000-R or if you have a modified 1000-X model. Our “X” model fenders will fit the 68.5″ 1000-R as well, but will provide less coverage than the “R” model.

All of our fenders are machine cut from American made materials and are formed to fit your vehicle.

The post HONDA TALON 1000 R FENDER EXTENSIONS appeared first on 850 Motorsports.

HONDA TALON 1000X FENDER EXTENSIONS

Jerry Jones — Sun, 07 Feb 2021 01:23:58 +0000

The new Honda Talon is finally here and we have fenders to help keep you clean! We have several options to choose from below. The vehicle shown in the pictures is a 68.5″ wide 1000-R with our narrower 1000-X kit installed. Please keep in mind, the Talon 1000-R models are 68.5″ wide versus 64″ wide for the 1000-X models. The 1000-X fits both the 2 seater and the 4 seater.

Note: modification to this product will be necessary if you have Honda Nerf bars or a similar product with the same mounting points.

Honda Talon 1000-X Fenders (ideal for 64″ 1000-X, but also fits 1000-R models)

1000 X Standard Front Fenders: Ideal for 64″+ wide Talons. This kit offers a lower profile look with great coverage to keep debris out of your cab. This design covers 70% of the front wheel wells.

1000 X Rear Fenders: Ideal for 64″+ wide Talons. This kit offers maximum protection from dirt, water, sand, cactus, gravel, and mud. Our rear fenders provide excellent coverage and they give block debris in the fender well.

*Note: Our “X” model fenders will fit the 68.5″ 1000-R as well, but will provide less coverage than the “R” model.

All of our fenders are machine cut from American made materials and are formed to fit your vehicle.

Hardware and Instructions included
Made in the USA
Honda Talon Mud Guards are sold separately

The post HONDA TALON 1000X FENDER EXTENSIONS appeared first on 850 Motorsports.

CAN-AM X3 RS WIDE FENDERS (FITS BASE MODELS, DS, RS, RC, & XMR)

Jerry Jones — Sat, 03 Aug 2019 18:07:54 +0000

The Can-am X3 RS, X3 RC, & the X3 XMR are mean machines that are capable of tackling everything from rocks, sand dunes, and mud holes. MudBuster’s X3 RS fenders offer the most coverage on the market to help keep you clean and make your time riding more enjoyable. All of our fenders are machine cut from American made materials. Stick with a name you can trust and a company that stands behind their products.

-Machine cut

-Ideal for RS, XMR, and 70″+ wide vehicles

-Formed to fit (not flat)

-Hardware & Instructions included

-Discounted single replacement fenders are available for existing customers

Our X3 Front Fenders offer 5″- 7.5″ of additional coverage!

Our X3 Rear fenders offer an additional 5″ of rear coverage (behind the tires) and up to 7″ of coverage on the side!

Note: Please see our X3 DS fenders if you prefer narrow fenders with less coverage. Our X3 DS fenders will also fit the RS model.

The post CAN-AM X3 RS WIDE FENDERS (FITS BASE MODELS, DS, RS, RC, & XMR) appeared first on 850 Motorsports.

POLARIS RZR XP TURBO-S MUD-LITE FENDER FLARES

Jerry Jones — Sat, 03 Aug 2019 17:51:01 +0000

The new Polaris RZR XP Turbo-S is finally here and we have fenders to help keep you clean! The new RZR XP Turbo-S fenders are very similar to our XP-1000 and XP Turbo products, but they have been modified to fit the XP Turbo S and offer even more coverage for it’s wider stance. The front fenders are the same in every kit, but we are offering 3 different rear fender kits to tackle any terrain.

Max Coverage Rear Fenders: Ideal for maximum protection from dirt, water, sand, cactus, gravel, and mud. The rear fender flares cover the wheel wells front to back.

Mud-Lite Rear Fenders: Offers great coverage to keep debris out of your cab and covers 60% of the rear wheel wells.

Race-Lite Rear Fenders: Ideal for racing, desert conditions, light mud, and damp terrain.

All of our fenders are machine cut from American made materials and are formed to fit your vehicle.

Hardware and Instructions included
More coverage than the competition
Made in the USA
Most orders ship the same day!

The post POLARIS RZR XP TURBO-S MUD-LITE FENDER FLARES appeared first on 850 Motorsports.

POLARIS RZR XP TURBO-S MAX COVERAGE FENDER FLARES

Jerry Jones — Sat, 03 Aug 2019 16:48:49 +0000

The new Polaris RZR XP Turbo-S is finally here and we have fenders to help keep you clean! The new RZR XP Turbo-S fenders are very similar to our XP-1000 and XP Turbo products, but they have been modified to fit the XP Turbo S and offer even more coverage for it’s wider stance. Please see below for a description of the available options.

Max Coverage Rear Fenders: Ideal for maximum protection from dirt, water, sand, cactus, gravel, and mud. The rear fender flares cover the wheel wells front to back.

Mud-Lite Rear Fenders: Offers great coverage to keep debris out of your cab and covers 60% of the rear wheel wells.

Race-Lite Rear Fenders: Ideal for racing, desert conditions, light mud, and damp terrain.

All of our fenders are machine cut from American made materials and are formed to fit your vehicle.

Hardware and Instructions included
More coverage than the competition
Made in the USA
Most orders ship within 1 business day!

IMPORTANT: YOUR VEHICLE MUST HAVE POLARIS XXL FRONT FENDERS IN ORDER FOR OUR XXL KIT TO FIT. IF YOUR VEHICLE HAS STOCK FENDERS, DO NOT ORDER THE XXL KIT.

The post POLARIS RZR XP TURBO-S MAX COVERAGE FENDER FLARES appeared first on 850 Motorsports.

POLARIS RZR XP TURBO-S RACE-LITE FENDER FLARES

Jerry Jones — Sat, 03 Aug 2019 16:09:23 +0000

Max Coverage Rear Fenders: Ideal for maximum protection from dirt, water, sand, cactus, gravel, and mud. The rear fender flares cover the wheel wells front to back.

Mud-Lite Rear Fenders: Offers great coverage to keep debris out of your cab and covers 60% of the rear wheel wells.

Race-Lite Rear Fenders: Ideal for racing, desert conditions, light mud, and damp terrain.

All of our fenders are machine cut from American made materials and are formed to fit your vehicle.

Hardware and Instructions included
More coverage than the competition
Made in the USA
Most orders ship the same day!

The post POLARIS RZR XP TURBO-S RACE-LITE FENDER FLARES appeared first on 850 Motorsports.

POLARIS GENERAL 1000 RADIATOR PROTECTION PANELS

Jerry Jones — Thu, 01 Aug 2019 17:16:56 +0000

Introducing our newest protection accessory for your Polaris General 1000!

Our radiator protection panels are machine cut from American made material. Our protection panels offer more coverage to help block rocks and debris from hitting your radiator! Every kit comes with hardware and detailed instructions.

The post POLARIS GENERAL 1000 RADIATOR PROTECTION PANELS appeared first on 850 Motorsports.

POLARIS GENERAL 1000 FENDERS

Jerry Jones — Thu, 01 Aug 2019 01:14:33 +0000

ntroducing our newest kit for the Polaris General 1000! If you’re tired of getting muddy every time you ride, these fenders are for you!
All of our fender flares are made from flexible material that is textured on top and smooth on the inside.
MudBusters fenders are shipped formed (not flat) and match the bends in your factory flares. Every General 1000 full kit comes with front/rear fenders, hardware, instructions (with pictures), and can be installed in about an hour.
We offer a standard coverage kit (for vehicles with factory wheels and tires) and an extra coverage option for those of you with aftermarket wheels, lifts, and/or wheel spacers. The extra coverage option adds an additional inch to the outside edge of the fenders. The General 1000 in the pictures has stock wheels with our standard fenders installed.

*If you select the General Combo Deal (fender flares, radiator guards, battery & gas protection panels), please leave us a comment at checkout to let us know what size fenders you want (standard or extra coverage).

The post POLARIS GENERAL 1000 FENDERS appeared first on 850 Motorsports.